Frame Relay was developed to solve communication problems that other protocols could not: the increased need for higher speeds, an increased need for large bandwidth efficiency, particularly for clumping ("bursty" traffic), an increase in intelligent network devices that lower protocol processing, and the need to connect LANs and WANs. Like X.25, Frame Relay is a packet-switched protocol. But the Frame-Relay process is streamlined. There are significant differences that make Frame Relay a faster, more efficient form of networking. A Frame-Relay network doesn't perform error detection, which results in a considerably smaller amount of overhead and faster processing than X.25. Frame Relay is also protocol independent-it accepts data from many different protocols. This data is encapsulated by the Frame-Relay equipment, not the network.

'Today's LANs and computing equipment have the potential to run at much higher speeds and transfer very large quantities of data. With the diversity and complexity of today's networks, management can be a mammoth task if you don't have the proper tools. Each environment is a unique combination of equipment from different vendors. Frame Relay uses a packet-switching technology, similar to X.25, but is more efficient. As a result, it can make your networking quicker, simpler, and less costly.

Frame Relay sends information in packets called frames through a shared Frame-Relay network. Each frame contains all the information necessary to route it to the correct destination. So in effect, each endpoint can communicate with many destinations over one access link to the network. And instead of being allocated a fixed amount of bandwidth, Frame-Relay services offer a CIR (committed information rate) at which data is transmitted. But if traffic and your service agreement allow, data can burst above your committed rate. Since Frame Relay has a low overhead, it's a perfect fit for today's complex networks. You get several clear benefits: First, multiple logical connections can be sent over a single physical connection, reducing your internetworking costs. By reducing the amount of processing required, you get improved performance and response time. And because Frame Relay uses a simple link layer protocol, your equipment usually requires only software changes or simple hardware modifications, so you don't

Definition 1. - The T1 (or T-1) carrier is the most commonly used digital line in the United States, Canada, and Japan. In these countries, it carries 24 pulse code modulation (PCM) signals using time-division multiplexing (TDM) at an overall rate of 1.544 million bits per second (Mbps). T1 lines use copper wire and span distances within and between major metropolitan areas. A T1 Outstate System has been developed for longer distances between cities.

Definition 2. - The T-carrier system, introduced by the Bell system in the US in the 1960's, was the first successful system that supported digitalised voice transmission. The original transmission rate (1.544 Mbps) in the Alton T1 line is in common use today in ISP (Internet Service Provider) connections to the Internet

Definition 3. - A high-speed digital connection capable of transmitting data at a rate of approximately 1.5 million bits per second. A T1 line is typically used by small and medium-sized companies with heavy network traffic. It is large enough to send and receive very large text files, graphics, sounds, and databases instantaneously, and is the fastest speed commonly used to connect networks to the Internet. Sometimes referred to as a leased line, a T1 is basically too large and too expensive for individual home use.

Definition 4. - A type of high speed Internet connection that provides a great deal of bandwidth. Many businesses lease T1 lines to connect to the Internet, but because they are expensive and offer more bandwidth than most small businesses and homes need, they are not realistic solutions for small and low-demand Internet users.

Is it time to look for t1 service? Many people are confused when they consider whether to upgrade from DSL or not. There are several factors to consider when examining you current DSL connection and the possiblity of replacing it. For many people the biggest factor is reliability and if reliability is critical to the applications you run over your connection you should seriously consider replacing your DSL connection with a T1. DSL is a quick and cost effective method of acquiring high speed bandwidth however it is not intended to support commercial applications or large numbers of users as are T1 connections.

Reliability becomes critical when customers or employees depend on your connection for immediate responses. If your customers use your connection to access your databases or your server or the internet then reliability of your connection is critical. If your employees depend on your connections because you host the e-mail server in house or host web servers or ASP type products, your connections is considered critical. A critical connection can be viewed much like a lifeline, without which your business would be negatively impacted. Your monthly savings of having a sub-par connections will not make up for the loss in productivity of your employees or loss of customers when your DSL connections gets bogged down or cut off. To reiterate, ciritcal connections should be supported with a T1. Our Page Keywords Are: Alton frame relay Alton Point to Point line Alton Point to Point connection Alton Point to Point service Alton Point to Point provider Alton Point to Point internet Alton Point to Point internet connection Alton Point to Point service provider Alton Point to Point price Alton Point to Point speed Alton Point to Point internet service Alton Point to Point internet access Alton fractional Point to Point Alton Point to Point bandwidth Alton Point to Point internet service provider Alton Point to Point internet provider Alton Point to Point pricing Alton Point to Point internet services Alton Point to Point services. These keywords provide a brief overview of the services offered by ShopforPoint to Point in your city.

Many customers are extremely price sensitive and cannot afford the cost of a T1 which can be as much as 20 times more expensive than a full T1 connection. Residential customers who are most sensitive to price should not consider a T1 circuit unless then have a business reason to pay for such a circuit and cannot access DSL service. Most people don't realize that a DSL connection can be just as fast as a T1 at 1.5Mbps. The shortcoming of DSL is that it is oversubscribed. This means there is a finite amount of bandwidth available and a customers speed can drop if other customers in the neighborhood decide to use their service. SDSL (Synchronous DSL) is a business class DSL and is ranked as a higher priority than residential DSL or ADSL (Asunchronous DSL). This means it is not oversubscribed to the extent than ADSL and is subject to fewer bandwidth restrictions. In short, if price is your critical factor go with DSL. If reliability is the critical factor purchase a dedicated T1.

Alton ShoreTel Dealers | Alton Nortel Dealers | Alton NEC Dealers | Alton Mitel Dealers | Alton Cisco Dealers | Alton IP PBX Phone System | Alton Avaya Dealers