Frame Relay was developed to solve communication problems that other protocols could not: the increased need for higher speeds, an increased need for large bandwidth efficiency, particularly for clumping ("bursty" traffic), an increase in intelligent network devices that lower protocol processing, and the need to connect LANs and WANs. Like X.25, Frame Relay is a packet-switched protocol. But the Frame-Relay process is streamlined. There are significant differences that make Frame Relay a faster, more efficient form of networking. A Frame-Relay network doesn't perform error detection, which results in a considerably smaller amount of overhead and faster processing than X.25. Frame Relay is also protocol independent-it accepts data from many different protocols. This data is encapsulated by the Frame-Relay equipment, not the network.

'Today's LANs and computing equipment have the potential to run at much higher speeds and transfer very large quantities of data. With the diversity and complexity of today's networks, management can be a mammoth task if you don't have the proper tools. Each environment is a unique combination of equipment from different vendors. Frame Relay uses a packet-switching technology, similar to X.25, but is more efficient. As a result, it can make your networking quicker, simpler, and less costly.

Frame Relay sends information in packets called frames through a shared Frame-Relay network. Each frame contains all the information necessary to route it to the correct destination. So in effect, each endpoint can communicate with many destinations over one access link to the network. And instead of being allocated a fixed amount of bandwidth, Frame-Relay services offer a CIR (committed information rate) at which data is transmitted. But if traffic and your service agreement allow, data can burst above your committed rate. Since Frame Relay has a low overhead, it's a perfect fit for today's complex networks. You get several clear benefits: First, multiple logical connections can be sent over a single physical connection, reducing your internetworking costs. By reducing the amount of processing required, you get improved performance and response time. And because Frame Relay uses a simple link layer protocol, your equipment usually requires only software changes or simple hardware modifications, so you don't

With software like GeoQuote, getting a t1 price has never been easier. Finally you'll be able to use your time for real analysis rather than hunting down information. With the information in front of you you'll have the information you need to study out the right plan for you. Now you won't have to feel like you have to have a 45 minute with the local phone company just to find out how much your service will cost. As GeoQuote is an information service that's exactly what you get....Information without the sales pitch.

GeoQuote is currently used by ShopForT1.com and several other licensees. Typically an agent will contact you after you have received your instant quote. Don't panic! These agents are not there to pressure you. Use them and their expertise to further investigate the servicese and carriers you see on your quote. We recommend the use of agents in any search for service and we also recommend using a broker to sign up for your service. Many people believe they can "beat the system" by contacting a broker to get pricing and other information as quickly as possible and will then go straight to the carrier believing they can get better service. This "end-run" process is actually a good way to cut yourself out of some of the biggest advantages of having a broker. Brokers don't mark up the price of services. They offer the same price you would get if you did go direct to the company.

The advantage of ordering through a broker is that you will get a second channel of customer service. If the company is not performing to expectation you will always be able to go back to your agent/broker who puts a significant volume through the carrier. An agent/broker is much more likely to get the companies attention and have your problem solved. In our opinion, GeoQuote real time pricing and an agent/broker is the only way to go!